Y-Ba-Cu-O超导涂层的研制

用等离子喷涂工艺制备了 Y-Ba-Cu-O 高临界温度超导涂层,涂层的初始转变温度为101K、零电阻温度为86K。电阻率与磁化率的测量结果表明这种超导涂层具有与烧结超导块体相类似的性能,X 光衍射谱显示出涂层主要由 YBa_2Cu_3O_(?)单相化合物组成。     

大变量逻辑函数最佳覆盖问题研究

逻辑函数的最佳覆盖，一直是逻辑综合领域的关键环节。尤其是大变量逻辑函数最佳覆盖，对复杂的逻辑综合更为重要，但也更加困难。本文在对逻辑覆盖算法研究的基础上，提出了适合大变量逻辑函数最佳覆盖的Beister改进算法。经过大量算题的测试表明，改进的列覆盖算法在时间复杂度和选择效果方面均优于Beister算法。     

A bibliometric study of China’s semiconductor literature compared with other major asian countries

In this paper we compare the scientific research in the semiconductor-related field in China with some other major nations in Asia. It is based on the bibliometric information from SCI-Expanded database during the time period of 1995–2004. We show that China has been developing fast in semiconductor research, and become the second productive country in Asia as reflected by the publication profile. The evidences indicate a significant increasing trend in the research efforts and readership among Asian countries. Similar to the scientists in Japan and South Korea, Chinese scientists were more inclined to work in larger groups, typically 4 or more authors. The assessment of research quality is further conducted based on citation-based measures. As benchmarks, two western countries, namely USA and Germany, have been compared in the citation analysis. It is revealed that the impacts of research outputs in the Asian countries, except for Japan, have been badly incommensurate with their devoted research efforts compared with USA and Germany. Like most of other Asian countries the research results of Chinese scientists in semiconductor have a low international visibility despite their strong research efforts and increasingly large domestic readership. The application of Leimkuhler curve illustrates vividly the inequality of citation times among the compared countries. Furthermore, the Gini Indices of each country and each pair of countries are calculated which illustrates again the inequality of informetric productivities.     

唐钢ER70S-6焊丝钢的生产工艺研究及质量分析

介绍了唐钢ER70S-6焊丝钢的特点，对盘条质量进行了分析。对该钢化学成分、冶炼和轧制工艺进行了优化研究，使其综合性能明显改善。     

1 000 t/d湿磨干烧生产线工艺特点和调试

湿法生产线的技术更新改造有异地新建新型干法生产线和原地改成湿磨干法生产线二种。浙江虎山集团(?)3.0 m×88.68 m湿法线的改造,经方案比较和生产原料的状况,采用了湿磨干烧方案。其中,料浆脱水采用了真空吸滤法,浇成系统采用了南京院专有技术。改造投产后,获得了优质、高产、低耗和安全生产的技改效果。     

腐殖质对重金属离子的吸附作用

采用腐殖质对重金属离子进行了吸附试验。其结果表明 ,腐殖质对重金属离子具有强烈的吸附作用。腐殖质对Cu2 + 、Zn2 + 、Cd2 + 的吸附边界pH值分别为 4 2 ,5 8,7 2 ,吸附率可达 95 %以上 ;对Pb2 + 的吸附作用更加强烈 ,在pH值为 3 5时吸附率就达到 95 %以上 ,并且随着pH值的升高吸附率仍在 95 %以上。腐殖质对 4种重金属离子的吸附能力由强到弱的顺序是Pb2 + >Cu2 + >Zn2 + >Cd2 + 。腐殖质可以用来处理含重金属离子的污水 ,具有过滤快、沉降稳定、效果好的优点 ;也可作为土壤改良剂 ,有效地降低土壤中重金属的含量     

关于飞行力学的再思考

对多年来国内外有关飞行力学的发展过程、研究范畴、分类，以及问题表述方式等重新进行了一些考察和思考．从学术和实践的观点，对飞行力学的体系结构和问题表述方式等进行了讨论，并提出了个人的一些看法和建议．     

浅谈电器故障的检修方法

以较简单的电机控制线路，介绍了电器故障的检修方法，并以广钢金石分公司生产的实例分析了继电器接触控制系统和PLC自动控制系统电器故障的检修过程，说明电器故障的消除必须走了解过程、查找、排除三个步骤。     

MCRC��ǻ��չ��ճ�̽

本文根据MCRC引进装置的情况,对加拿大Delta公司的MCRC硫回收工艺作了初步探索,介绍了该方法的工艺特征,并评述了引进装置的性能考核结果。文中还结合四川气田建厂的环保要求,评价了MCRC方法的使用价值及意义。